MasterHeat Coated In Floor Heating Wire Spool - 2.5" 240v

MasterHeat 240v Coated Floor Heating Wire Spools - 2.5" spacing

More Views

MasterHeat Coated In Floor Heating Wire Spool - 2.5" 240v
$137.91
From $137.91 to $617.61

* Required Fields

Product Description

MasterHeat 240v coated wire is a simple, economical way to warm floors and rooms, without the issues of forced air heating (dirty ducts, allergens, filter changes, humidity changes). Warm all kinds of floor coverings including ceramic tile, stone, wood, laminates, vinyl and carpet. Whatever your installation, there is a MasterHeat in floor warming cable spool sized just for your project. MasterHeat Coated Wire is made the same as MasterHeat Wire, but has an additional tough, water proof outer jacket.

MasterHeat coated in floor warming wires can be used in all applications including showers and and anywhere else the toughness of an outer jacket is needed

MasterHeat in floor heating wires can be spaced and attached with metal straps or with the Radiant Positioning Mats. In either case, pay special attention to how thin-set or self-leveling mortar should be applied over the cables prior to setting tile, stone, or other flooring.

  • Evaluate how many square feet of floor you would like to be heated by radiant heat. Do not put under cabinets or appliances. Generally, about 85%-90% of the open areas should have the floor warming element. Leave the in floor heating wire at least 4"-6" away from your walls. To keep toes warm, install right up to the toe-kick in front of kitchen or bath cabinets, and in front of a toilet, shower or tub.
  • Water-Proof Outer Jacket
  • Now U.L. Approved for Showers
  • Tough Stainless Steel Ground Braid
  • Single-point Connection
  • Using the New “shower approved” MasterHeat Coated Wire makes it easy to heat your dry and wet floor areas with the same cable.
  • Oxygen-free heating elements
  • ETFE insulation
  • Stainless Steel ground braid
  • New red outer jacket
  • Approved for showers

Wire Spacing:

  • 2” on center = 15 Watts/sq. ft. - Use on concrete basement slabs, sunrooms, and in other high heat loss areas.
  • 2-1/2” on center = 12 Watts/sq. ft. - Use in bathrooms, kitchens, dining/living areas, etc.
  • 3” on center = 10 Watts/sq. ft.  - Use in hallways, entries, low heat loss areas, etc

2-1/2” on center is the most commonly used spacing, and equals the heat output of MasterHeat mats.

Item # Length Sq.Ft. @ 2" o.c. (15W/sq.ft.) Sq.Ft. @ 2.5" o.c. (12W/sq.ft.) Sq.Ft. @ 3" o.c. (10W/sq.ft.) Amp Draw
81013451 94 16 20 24 1.0
81013452 142 24 30 36 1.5
81013453 188 32 40 48 2.0
81013454 236 40 50 60 2.5
81013455 282 48 60 72 3.0
81013456 330 56 70 84 3.5
81013457 376 64 80 96 4.0
81013458 424 72 90 108 4.5
81013459 470 80 100 120 5.0
81013460 564 96 120 168 6.0
81013461 658 112 140 168 7.0
81013462 752 128 160 192 8.0
81013463 846 144 180 216 9.0
81013464 940 160 200 240 10.0

 

Download User Manual

Product Specifications

SKU: mh810134
Manufacturer: MasterHeat
Warranty: 25 Year Limited Warranty
Voltage: 240

Product Questions & Answers

Q: Can the rolls of MH 240v coated wire be spliced for larger floor areas? I need to cover 400 sf, but your largest rolls only cover 200 sf each.
A:
For 400 sq ft you would need to buy 2 wire sets, a thermostat and a relay, with a max of 300 sq ft to the thermostat.
Customer Support answered on November 6, 2017
+ Add Your Review

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Overall