Wedi Subliner Dry Mixing Valve Flexi Collar US5000000

Wedi Subliner Dry Mixing Valve Flexi Collar US5000000
Wedi Subliner Dry Mixing Valve Flexi Collar US5000000
$11.57
  • On Order(More Info)
  • Free on orders over $49 in Continental US (More Info)
  • W_FLEXI_VALVE

  • Wedi
Wedi products can be shipped factory direct. You may order more than our available in-store stock quantities, which are listed above.

Product Description

5" x 5" Subliner Dry mixing valve collar designed for mixing valve pipes protrusions through Wedi panels. This flexi collar has an interior opening diameter of 3.9". Wedi part number US5000000

Subliner Dry is a waterproof, thin-layer, crack isolating sealing mat is made from highly tear-resistant polyethylene film, which offers optimum connection to tile laying materials thanks to its dual-sided special fleece lamination. The installation over preexisting wall surfaces is smooth and any thinset suitable for the tile or stone finish may be used on top of the Wedi system. The wedi Subliner Dry is part of the Wedi System which includes wedi sealing tape, prefabricated corner tape and plumbing fixture collars as well as bonding flange drains, sold seperately.

Product Specifications

SKU: W_FLEXI_VALVE
Manufacturer: Wedi

Product Questions & Answers

Q: Is the Wedi Flexi mixing valve collar a universal fit or do I have to order to fit the mixing valve. Thank you, Bill Z
A:
The Wedi Flexi Mixing Valve Collar fits most but not all. You will need to look at what size hole you need to cut and see if its the same size as the mixing valve gasket.
Customer Support answered on August 15, 2017
Q: Hi, I have been looking for instructions stating how to install the wedi Mixing Valve Flexi Collar and have not been successful. Please supply.
A:
Unfortunately, wedi does not have a specific installation video on these. They are designed to be used with wedi board, so here are the instructions to mount to wedi board.

In order to install the wedi mixing valve cover you need to measure the outside diameter of the collar, (approximately 4"), and cut that size hole in the wedi board that will surround the mixing valve. Then, after the wedi board is mounted, apply some thinset around the hole and slide the collar into place. Then embed the collar surrounds into the thinset, using a wedi corner putty knife. let dry, then coat the top of the seams with wedi joint sealant.

Wedi.com has a comment section for additional help, or feel free to give us a call at 800-938-7925.
Customer Support answered on September 25, 2017
+ Add Your Review

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Overall