Home >> >> Husqvarna FS 6500 G Flat Saws w/ Water Pump
Husqvarna FS 6500 G Flat Saws w/ Water Pump
|
The Husqvarna FS 6500 combines the traditional 65
hp gasoline engine with the excellent maneuverability
of the narrow frame design. The power-to-weight ratio
makes the FS 6500 the ideal saw for utility work.
65 hp Wisconsin V465 gas engine delivers 42 hp at the
bladeshaft.
The patented IntelliSeal bladeshaft system allows for a minimum 500-hour service interval and
eliminates daily greasing of bearings.
Blade guard is a single, vertical slip-on tab for easy
removal and allows right or left side mounting for
multiple cutting applications.
Vertically mounted water tubes with single large opening
provides superior blade cooling.
Sealed ball bearing, maintenance-free polyurethane
front wheels and quick disconnect rear wheels are for
easy maintenance.
Eaton model 10 hydrostatic drive with chain and gear
reduction drive system provides infinite speeds from 0 to
200 fpm.
Positive depth stop prevents blade from being lowered
past pre-set depth.
Cutting depth indicator clearly shows depth of blade in
the cut and is adjustable for all blade diameters.
Voltmeter and oil pressure gauges are for monitoring
engine systems.
Switch controlled water safety device shuts engine off
when water pressure drops to protect the blade.
Lowering valve adjusts feed rate when lowering blade in
cut.
Single lever for forward/reverse, raise/lower offers reliable
and infinite variable ground speed control and allows the
blade to be quickly raised and lowered.
Separate neutral engage lever is mounted on the cowl
and allows for quick disengage of transmission for ease
in transport.
|
| SPECIFICATIONS: | | Motor | Wisconsin Gas Engine | | Motor (hp) | 65 | | Motor spec | v465 | | Max Depth of Cut (in) | 15 | | Spindle diameter (in) | 1 | | Blade shaft diameter (in) | 1.75 |
| 
