Home >> >> Metabo KHE54 1 9/16" Spline Rotary Combination Hammer 6.06061.42
Metabo KHE54 1 9/16" Spline Rotary Combination Hammer 6.06061.42
|
Article number: 6.06061.42
- suitable for bits and accessories with spline shank bit and with 19 mm hexagonal and cylindrical end Ø 16.5 mm
- rotation stop
- Metabo CODE! system: electronic anti-theft system, activated by CODE! key (accessory)
- Vario Tacho Constamatic (VTC) full-wave electronics
- thumbwheel for preselection of speed
- pneumatic high-performance hammer mechanism
- magnesium die cast gear housing
- dust seal protects from the finest dust particles
- active vibration damping
- ergonomic housing design for fatigue-proof operation
- rubber-coated handle
- torque limiting clutch
- auto-stop carbon brushes
|
| SPECIFICATIONS: | | Drilling diameter in concrete (in) | 1.625 | | Drilling diameter in bricks (in) | 3.5 | | No Load Speed (rpm) | 135-275 | | Rated current (A) | 9.6 | | Rated input power (W) | 1050 | | Output power (W) | 590 | | Rated load speed (min) | 275 | | Maximum impact rate (/min) | 2600 | | Single-blow Energy (JJ) | 1-9 | | Collar diameter (in) | 2.25 | | Bit retainer | Spline Shank bit 19mm hexagon | | Weight without main cable (lb) | 13.9 |
| 
