Home >> >> Metabo KHE55 1 9/16" SDS-Max Rotary Combination Hammer 6.00055.42
Metabo KHE55 1 9/16" SDS-Max Rotary Combination Hammer 6.00055.42
|
Article number: 6.00055.42
- suitable for bits and accessories with SDS-max shank bit
- with the appropriate accessories, it is also suitable for bits and accessories with spline shank bit or ratio thread
- rotation stop
- Metabo CODE! system: electronic anti-theft system, activated by CODE! key (accessory)
- Vario Tacho Constamatic (VTC) full-wave electronics
- thumbwheel for preselection of speed
- pneumatic high-performance hammer mechanism
- magnesium die cast gear housing
- dust seal protects from the finest dust particles
- ergonomic housing design for fatigue-proof operation
- rubber-coated handle
- extra handle with drill depth-stop
- torque limiting clutch
- no-volt release switch
- auto-stop carbon brushes
|
| SPECIFICATIONS: | | Torque (lbs) | 531 | | Drilling diameter in bricks (in) | 3.5 | | Drilling diameter in concrete (in) | 1.625-3.5 | | No Load Speed (rpm) | 135-275 | | Rated current (A) | 9.6 | | Rated input power (W) | 1050 | | Rated load speed (min) | 275 | | Maximum impact rate (/min) | 2600 | | Single-blow Energy (JJ) | 1-9 | | Bit retainer | sds-max | | Weight without main cable (lb) | 13 |
| 
