Home >> >> Metabo UHE28 1 1/8" SDS - 0-950/0-2,600 RPM - 8.0 AMP Combination Hammer 6.00361.42
Metabo UHE28 1 1/8" SDS - 0-950/0-2,600 RPM - 8.0 AMP Combination Hammer 6.00361.42
|
Article number: 6.00361.42
- suitable for bits and accessories with SDS Plus shank end or cylindrical shaft (without impact)
- hammer stop
- rotation stop
- Metabo "Quick" drill chuck change
- clockwise and anticlockwise rotation
- Vario Tacho Constamatic (VTC) full-wave electronics
- thumbwheel for preselection of speed
- robust Metabo Marathon motor
- two-speed gear unit
- pneumatic high-performance hammer mechanism
- die cast aluminum gear housing
- ergonomic housing design for fatigue-proof operation
- rubber-coated handle
- rubber coated additional handle with drill depth-stop
- Metabo S-automatic torque limiting clutch
- Metabo winding protection grid
- overload protection
- no-volt release switch
- auto-stop carbon brushes
- brush wear indicator
|
| SPECIFICATIONS: | | Torque (lbs) | 195 | | Drilling diameter in concrete (in) | 1.125 | | Drilling diameter in bricks (in) | 3.125 | | Drilling diameter in steel (in) | .625/.3125 | | Drilling diameter in wood (in) | 1.625/.75 | | No Load Speed (rpm) | 0-950/0-2600 | | Rated input power (W) | 1010 | | Output power (W) | 600 | | Rated load speed (min) | 950/2600 | | Maximum impact rate (/min) | 4400 | | Single-blow Energy (JJ) | 0-2.4 | | Collar diameter (in) | 1.75 | | Bit retainer | SDS-plus | | Chuck Size (in.) | 1.5-13 | | Weight (lbs) | 6.2 |
| 
