Home >> >> Husqvarna FS 6600 D 18 Walk Behind Concrete Saw
Husqvarna FS 6600 D 18 Walk Behind Concrete Saw
|
The FS 6600 D is a powerful and highly efficient saw. Its power / size ratio makes it an extremely versatile and super-productive saw in all cutting applications, particularly when the saw is equipped with the 3-speed gear box. The tachometer/bladeshaft rpm gauge on the FS 6600 D and FS 4800 D indicates engine rpm or bladeshaft rpm. Bladeshaft rpm range is colour coded to gear selection position. On the FS 6600 D and FS 4800 D, the gearbox shift lever is used to change the output speed of the engine gearbox. Three speeds and two neutral positions are standard. The gearbox shift lever positions are colour-coded to match the blade diameter and the bladeshaft rpm decal located on the control panel. Gearbox detent locks the gearbox shift lever in position. Patent pending electric tracking system lets operator make tracking adjustments while cutting. Innovative hydrostatic drive system with balanced dual motor drive system. No belts, chains or gears to adjust.
- Control panel with temperature gauge, ammeter, tachometer and blade clutch switch.
- The Quick Stick™ one-hand control is used for drive, control and raising and lowering the blade.
- Blade clutch allows engine operation and saw movements without blade rotation and assists in freeing blades stuck in cut.
- The IntelliSeal blade spindle (patent pending) has four sealed radial bearings for strength and durability. Allows for a minimum of 500 hour maintenance intervals and a 1000 hour limited warranty.
- John Deere 4-cylinder turbocharged diesel engine.
- Patented power transmission system with right-angle gearbox and 16 V-belts for optimum power transfer.
- Hydraulic parking brake.
- Patent-pending electric tracking system reduces operator fatigue and requires no tools.
- Equipped with single handle control, blade clutch (for single speed version only), and IntelliSeal blade shaft.
|
| SPECIFICATIONS: | | Motor | John Deere | | Motor (hp) | 66 | | Max Depth of Cut (in) | 17.5 | | 1 | | Blade shaft diameter (in) | 2 |
| 
