Home >> >> Husqvarna FS 4800 D Flat Saws w/ Rear Pivot Standard
Husqvarna FS 4800 D Flat Saws w/ Rear Pivot Standard
|
The FS 4800 D is a professional and very versatile flat saw for large and mid-size jobs. It is available in front pivot and rear pivot configurations. A rear pivot saw is recommended when maneuverability is key in road repair and service work. The front pivot version is preferable for normal road sawing operations.
? Yanmar 48 hp 4-cylinder liquid-cooled, diesel engine
meets current EPA requirements.
? Patented power transmission system has a right angle
gearbox configuration with 12 V-belts. This transmits
more power to the bladeshaft than similar models in its
class, delivering 42 hp at the bladeshaft.
? The patented IntelliSeal? bladeshaft system allows for a
minimum 500-hour service interval, eliminating daily
greasing of bearings. Quick disconnect blade flange is
standard.
? Patent-pending multi-positional handlebars easily adjust
to individual operator?s preference which increases
operator comfort and reduces fatigue.
? Slip-on blade guard comes with auto-latch for easy removal and installation.
? Balanced dual motor hydrostatic drive system eliminates
surging and lag while cutting - with no belts, chains or
gears; requires no adjustment.
? Front pivot model has a patent-pending electric tracking
system option, which allows the operator to make
tracking adjustments with a switch while cutting.
? Blade clutch option assists in freeing blades stuck in the
cut and allows engine operation without blade rotation.
? Rear pivot model offers an electrically controlled
hydraulic differential system that locks rear wheels for
positive traction to prevent slipping.
|
Specifications
| Air Filter Type | Dual element radial seal | | Arbor Size | 1in., single drive pin | | Axle front/rear | 1in./ 4in.-bolt hub mount | | Blade Diameter (in) | 20in. - 36in. | | Blade Flanges | 5in. - 6in. | | Blade Guard | Slip-on | | Blade Shaft (RPM) | 2400 - 1350 | | Blade Shaft Diameter | 2in. | | Bore/Stroke | 3.46in. / 3.54in. | | Cylinders/cycle | 4/4 | | Displacement | 133 cu.in. | | Engine Cooling | Liquid/air | | Fuel Tank Capacity | 7.8 gal | | Handlebar adjustment | Variable positioning | | Horsepower | 48hp | | Horsepower at Blade Shaft | 42hp | | Max. Depth Of Cut | 7-5/8in. - 15in. | | Number of Belts | 12 (4 each 3 band 3VX) | | Oil Capacity | 7.8 qt | | Power Source | Diesel | | Starter | Electric | | Transmission Speeds, rear pivot, fpm | 0 - 200 differential locked, 0 - 100 unlocked | | Transmission Type | Dual motor hydrostatic drive | | Wheels front | 6in. x 2in. | | Wheels rear | 10in. x 3in. | | Blade Depth Control | Electrohydraulic raise and lower | | Engine | Yanmar (4TNV88) |
| 
