Home >> >> Schluter - DITRA & DITRA XL
Schluter - DITRA & DITRA XL
SEEN IT FOR LESS OR NEED A BETTER PRICE? PLEASE CLICK ON "MAKE OFFER" BUTTON.
|
Schluter - DITRA and DITRA XL sold by the roll
Schluter - Ditra is an uncoupling and waterproofing membrane that is recommended for any even and load-bearing substrate such as: plywood and OSB; 24" o.c. truss and I-joist systems; green concrete; gypsum-based screeds; pre-stressed and post-tensioned concrete; and radiant-heated floors. For most tile installations, Schluter - DITRA eliminates the need for a second layer of plywood or for the use of cementitious backerboard. Schluter - DITRA ensures a lasting installation by allowing independent movement between the tile covering and the substrate. This eliminates the transfer of stresses from the substrate to the tile covering. In addition, Schluter -DITRA is lighter, thinner, and easier to apply than any other underlayment.
Exclusively designed for ceramic and stone tile surfaces
Neutralizes stress between the subfloor and tile surface, eliminating the main cause of cracking
Waterproofs and allows moisture in the substrate to evaporate
Allos ceramic tile installations over single-layer plywood (at least 5/8" thick over 16" o.c. floor joists), eliminating the need for a second sheet of plywood or backerboard
Ideal for interior and exterior tile and stone installations
|
|