PASCO Vinyl Shower Pan Cement
SEEN IT FOR LESS OR NEED A BETTER PRICE? PLEASE CLICK ON "MAKE OFFER" BUTTON.
|
IF YOU HAVE A BIG JOB COMING UP AND WOULD LIKE TO SEE IF YOU CAN GET BETTER PRICING CLICK ON THE "MAKE OFFER" BUTTON.
DIRECTIONS FOR USAGE:
1. Surfaces to be joined must be clean and dry.
2. Apply cement with dauber or short natural bristle brush. If
cement appears jellied, may be thinned by adding a small amount
of acetone.
3. To join sheets allow a 4” minimum overlap. Apply a thin, even
coat of cement to both surfaces to be joined. The entire surface of
the material to be joined must be covered with cement. Apply the
cement to the short lengths of material, not to exceed 3’ at a time.
4. Join cemented surfaces as quickly as possible before cement
dries. For seams exceeding 6’ in lenght, use a weighted, smooth
flooring roller to faciliate bonding of material.
5. Apply a wide bead of cement to the entire length of the overlap.
If material has been joined outside of installation area, apply the
bead to both top and bottom edges of the overlap.
6. Do not disturb or try to peel joined surfaces. The cemented
seam should fully cure in 24 hours.
NOTE: COMMON PVC PIPE CEMENT WILL NOT SOLVENT
WELD VINYL SHOWER PAN LINER
|
| 
