Radiant DualTemp Floor Sensor
SEEN IT FOR LESS OR NEED A BETTER PRICE? PLEASE CLICK ON "MAKE OFFER" BUTTON.
|
The DualTemp is a heat-only thermostat with the ability to monitor (1) air temperature, (2) floor temperature,
or (3) a combination of air and floor temperatures. In the air mode, set the desired air temperature with a min/max
floor temperature. In floor mode, the DualTemp is set to maintain a desired floor temperature with a min/max floor temperature
range. Simply select the proper internal settings to conform to the needs of the project. Order a floor sensor
separately, if required. When the 10k floor sensor is connected, the DualTemp can be configured to either maintain a
minimum floor temperature or restrict the maximum floor temperature.
The outside dial (non-digital) adjusts the desired air temperature and the inside potentiometer adjusts the minimum
or maximum floor temperature. The air temperature is adjustable from 41° to 86°F (5° to 30°C). The inside potentiometer
is adjustable from 50° to 104°F (10° to 40°C).
The digital DualTemp also has a manual temperature setback feature, and the ability to connect to Watts Radiant’s
Pump or Zone Valve/Actuator with the Master Timer. This Master Timer can control multiple thermostats and two setback
schedules within the home. When controlled by a Master Timer, a 4°F setback can be programmed.
The 24v DualTemp is a three-wire thermostat. It must be powered from the same external 24-VAC transformer
that powers the relay coils. It can control a 5-VA 24-VAC actuator directly, or a pump through an external relay. The battery-
powered DualTemp is powered by 2 AAA batteries, so only two thermostat wires are needed. It can control a 5-VA,
24-VAC actuator directly, or a pump through an external relay.
|
| 
