Smith's Green Clean 2 Gallon

Smith’s Green Clean

is a non-corrosive biodegradable gel developed to prepare a concrete substrate by producing a moderate surface texture. From the machine troweled interior surfaces to smooth exterior slabs, Smith's Green Clean is the next generation in surface preparation. This product not only reduces contractor labor, but also increases the adhesion of Smith's Decorative Concrete Products through proper surface preparation.
Remove paint, adhesives and loose particulates from the intended application surface. Amply apply Smith’s Green Clean to the substrate with ½ inch nap roller cover. Allow the gel to remain on the substrate for 20 minutes. For exterior application, utilizing a 12,000 work units* pressure washer in conjunction with a 15 degree tip, remove the Smith’s Green Clean with overlapping line patterns. For interior surface preparation, agitate Smith’s Green Clean utilizing a floor buffer (small area) or an auto-scrubber (large area) with brush attachments while rinsing with clean water. Extract material utilizing a wet/dry vacuum or lower the uptake bar on the auto-scrubber. Continue to flush and agitate the substrate until the rinse water is clean. If additional profile is desired, reapply Smith’s Green Clean following the previous directions. Allow surface to dry before application of Smith's Decorative Products.