Makita DPC6411 14" Power Cutter - 64cc. (upgrade of DPC6401)
|
- Five-stage, foam-paper-nylon system with Advanced Directional Air Flow provides very clean air for better saw performance
- Reinforced aluminum blade guard with 70° range of limitless positioning using a marked knob handle
- Improved ignition system with larger flywheel and rare earth magnets for more power
- Cutting arm position simply changes from center position to flush (outboard) position allowing cuts directly adjacent to curb edges, walls or directly above the ground
- Starter grip and decompression valve located on the same side for faster starting
- On-Off-Choke operating switch on a single lever for operator convenience
- Cushioned operator grips with 4 vibration-absorption rubber buffers for increased operator comfort
- Water kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank
- Improved exhaust emissions are EPA Phase II compliant while maintaining power and performance
- INCLUDES:
- 14" Cut-off wheel (965-210-223)
- Universal wrench (941-719-140)
- Torx key (940-827-000)
- Screwdriver (944-340-001)
- Arbor Ring (22 mm to 1") (394-228-120)
- Engine Displacement (cu.in.) 3.9
- Max. power (HP) 4.4
- No load RPM 9,350
- Fuel Fuel mixture 501
- Fuel tank capacity (oz.) 37
- Blades Max. spindle speed 4,300
- Wheel diameter 14"
- Arbor 1" (w/adaptor)
- Max. cutting depth 4-13/16"
- Net Weight (lbs.) 21.8
- Shipping Weight (lbs.) 28.0
- UPC Code 088381063593
|
| 
