Home >> >> Husqvarna Soff-Cut 750
Husqvarna Soff-Cut 750
|
The Husqvarna Soff-Cut 750 self-propelled gas saw is ideal for commercial and industrical applications. It was designed for ease of use and convenience. Features include a low dust blade block system, which allows the saw to cut dry, while controlling debris for easy cleanup. Much like the entire line of Husqvarna Soff-Cut saws, the 750 works in conjunction with Soff-Cut blades and patented skid plates to allow for Ultra Early Entry? cutting to minimize chipping and spalling while getting the job done the same day.
- * Recommended for light to medium-duty usage on driveways, parking lots and sitework.
- * Low noise and low dust blade block enclosure.
- * 6 horsepower engine with cyclone air filter.
- * Mechanical blade depth control.
- * Non-marking and non-stick polyurethane wheels.
- * High strength single piece frame.
- * Center lifting handle.
- * Distinctive roll cage style framework.
- * Patented safety arbor.
- * Easy pull start engine.
- * Turns ragged, chipped or raveled saw joints into beautifully beveled or radius edges.
- * A preset depth of cut - no fumbling with depth screws and bolts to adjust for proper radius or V-blade cutting.
- * Self-aligning guide wheels - guarantee proper blade alignment with saw joint every time.
- * Three (3) different size guide wheels, for 1/8", 1/4", and 1/2" saw joint, assures optimum performance.
- * Bronze bushing mounted guide wheels allows for smooth operation for consistent width cut.
- * Larger diameter blade block shafts, front and rear for increased rigidity and strength.
- * Integrated weight block - maintains proper weight balance for consistant cut.
- * Stainless steel front diverter - reduces dust blown out.
|
Specifications
| Air Filter Type | Dry type dual element with pre-cleaner | | Arbor | Triangular | | Axle front/rear | 1in. / 1in. | | Blade Diameter (in) | 8in. | | Blade Flanges | 4-1/4in. | | Blade Shaft (RPM) | 3,800 | | Blade Shaft Diameter | 1-1/4in. | | Bore/Stroke | 2.6in. / 1.8in. | | Cylinders/cycle | 1/4 | | Displacement | 10.3 cu.in. | | Engine Cooling | Air | | Fuel Tank Capacity | 0.95 gal | | Horsepower | 5.7hp | | Max. Depth Of Cut | 1-3/16in. | | Oil Capacity | 0.63 qt | | Power Source | Gasoline | | Starter | Recoil | | Wheels front | 4in. x 4in. ; 2 each | | Wheels rear | 8in. x 2-3/16in. ; 1 each | | Handlebar adjustment | Fixed | | Blade Guard | Enclosed | | Number of Belts | 2 (1 each 2 band 3VX) | | Blade Depth Control | Manual | | Engine | Robin (EX17) |
| 
