Home >> >> Husqvarna Guardmatic ® MS 510 Electric Masonry Saw
Husqvarna Guardmatic ® MS 510 Electric Masonry Saw
|
This saw proves its value daily on the job, and many of them have been on the job for over 25 years. If you need a production masonry saw you can count on year after year, the reliable Husqvarna Guardmatic MS 510 is the saw for the job. - * Dual capacitor increases power efficiency and reduces run amperage
- * Patented Sta-Level® Blade Guard
- * The engine start/stop switch on the TS 510 is located in easy reach of the operator
- * 2 Pivot Points
- * 3 hp, 5 hp, or 7-1/2 hp electric motor options.
- * Dual capacitor increases power efficiency and reduces run amperage, making it an ideal machine for low voltage conditions.
- * Capable of cutting 8" x 8" x 16" block.
- * Only two pivot points for reduced saw maintenance and longer diamond blade life.
- * Cutting head pivots on bearings which are sealed and lubricated for life. No greasing required.
- * A patented cutting head allows for easy removal and transportation on electric models.
- * Height can be controlled with a convenient crank control on foot pedal.
- * The Sta-level® blade guard keeps the blade guard parallel to the cutting table for accurate cuts.
- * The ergonomically designed steel handle with molded grip bolts securely into place.
|
Specifications
| Arbor Size | 1in. | | Blade Diameter (in) | 14 - 20 | | Blade Guard | One-piece steel | | Blade Shaft (RPM) | 3,090 - 2,317 | | Bladeshaft Bearings | Ball bearings | | Conveyor cart | Cast aluminum | | Cycle/Current | 60/AC | | Depth of Cut (in.) | 5 - 8 | | Engine Cooling | Air | | Full Load Amps | 14.5/13 - 19.4/9.7 | | Number of Belts | 2V-belts - 3V-belts | | Phase | 1 - 3 | | Power Source | Electric | | Starter | Capacitor | | Starting Amps | 188/95 - 166/83 | | Voltage | 280/230 - 230/460 | | Water Pump | Submersible |
| 
