Home >> >> Husqvarna Gas Guardmatic ® TS 510 G
Husqvarna Gas Guardmatic ® TS 510 G
|
This saw proves its value daily on the job, and many of them have been on the job for over 25 years. If you need a production masonry saw you can count on year after year, the reliable Husqvarna Guardmatic MS 510 is the saw for the job.
- * Patented Sta-Level® Blade Guard
- * 2 Pivot Points
- * An optional clutch enables the saw to idle without blade rotation.
- * Four large engine isolators for maximum reduction of vibration
- * Gas powered 9 hp or 11 hp engine options.
- * Dual capacitor increases power efficiency and reduces run amperage, making it an ideal machine for low voltage conditions.
- * Capable of cutting 8" x 8" x 16" block.
- * Only two pivot points for reduced saw maintenance and longer diamond blade life.
- * Cutting head pivots on bearings which are sealed and lubricated for life. No greasing required.
- * Height can be controlled with a convenient crank control on foot pedal.
- * The Sta-level® blade guard keeps the blade guard parallel to the cutting table for accurate cuts.
- * The ergonomically designed steel handle with molded grip bolts securely into place.
|
Specifications
| Air Filter Type | 9hp Dual Element / 11hp Cyclone | | Arbor Size | 1in. | | Blade Diameter (in) | 20 | | Blade Guard | One-piece steel | | Blade Shaft (RPM) | 3,500 - 2,202 | | Bladeshaft Bearings | Ball bearings | | Bore/Stroke | 3.0/2.3 - 3.5/2.5 | | Conveyor cart | Cast aluminum | | Cylinders/cycle | 1/4 | | Depth of Cut (in.) | 8 |
| 
