Radiant Floor Heating

Set Descending Direction

7 Item(s)

  • MasterHeat Display Panel, PM-DP, 24V

    MasterHeat Display Panel, PM-DP, 24V

    $131.43
    Shipping: Standard
    This control allows convenient indoor monitoring and control of the system for manual on, automatic, and standby operation.
  • MasterHeat PM-824 Detector w/ 10' cable - 24vac

    MasterHeat PM-824 Detector w/ 10' cable - 24vac

    $394.27
    Shipping: Standard
    Used to detect snowfall and low temperature to activate the MasterHeat mats or cables.
  • MasterHeat PM-HSC5 Slab Detector, 24vac

    MasterHeat PM-HSC5 Slab Detector, 24vac

    $1,428.44
    Shipping: Standard
    Slab-mounted snow detector used to detect snowfall and low temperature to automatically activate the MasterHeat mats or cables.
  • ProMelt PM-824 Detector - 24v

    ProMelt PM-824 Detector - 24v

    $526.00
    Shipping: Standard
    The 24v ProMelt PM-824 has a 10 ft cable and uses a moisture sensor affixed to the top to detect snowfall and low temperature to activate the ProMelt Mats or Cables.
  • ProMelt PM-DP Display Panel

    ProMelt™ PM-DP Display Panel - 24v

    $179.00
    Shipping: Standard
    The 24v ProMelt PM-DP Display Panel provides control of the snow melting system from a convenient location and enables home automation system access.
  • ProMelt™ PM-HSC5 Detector, 24v

    ProMelt™ PM-HSC5 Detector, 24v

    $1,988.00
    Shipping: Standard
    Slab-mounted snow detector. It is used to detect snowfall and low temperature to automatically activate the ProMelt Mats or Cables.
  • Suntouch ProMelt™ PM-224 Detector, 24v

    Suntouch ProMelt™ PM-224 Detector, 24v

    $451.00
    Shipping: Standard
    With a moisture sensor "fixed" to the top, the PM-224 detects snowfall and low temperature to activate the ProMelt Mats or Cables.

Set Descending Direction

7 Item(s)

We carry a full line of our own MasterHeat radiant floor heating, along with Nuheat, Suntouch and Ditra Heat from Schluter. Electric radiant floor heating is a cost effective way to heat a home, with an average operating cost of about a dime a day. Electric in floor heating can be installed in wire or mat form. Wire is strung by hand on either special mats, or using specialized hardware attached to the floor. In mat form, the wire is prestrung, and the mat is simply laid on the floor and secured with double sided tape. In both cases, the heating wires are then covered in cement mortar.