Weha Achilli MSA Bridge Saw 14445

Weha Achilli MSA Bridge Saw 14445
$27,235.00
  • Ships from Factory (More Info)
  • Free to commercial address in Continental US (More Info)
  • weha_msa_45

  • Weha

Product Description

The Achilli MSA 45 is specifically designed to make 45 degree miter cuts in granite, marble, engineered stone, quartz, and quartzite stone counter tops and slabs. It features a powerful 7.5 hp variable speed motor motor, and a water recycling system. This production saw frees up the primary bridge saw from having to make 45 degree stone cuts and is extremely accurate.

  • Steel frame, sandblasted and painted with epoxy-powder finish.
  • Head travel on linear guides fitted with recirculating ball slides.
  • Motorized head travel on X-axis with variable speed.
  • 10 pneumatic pistons to secure the workpiece in place during machining.
  • Work table made of polyzene.
  • Variable speed 7.5 HP motor.

Head motion:

  • Linear guides fitted with recirculating ball slides.
  • Head travel (X axis): 129" (3300 mm) - feed speed from 0 to 7 meters/minute.
  • Max. workable thickness 1mm - 3" (80mm)

Controls - main electrical panel:

  • Main isolator switch
  • Emergency stop push button
  • Power-on “RESET” button

Technical specifications:

  • Useful cut: 130" (3300mm)
  • Overall dimensions: 171" x 59 x 58"
  • Worktable dimensions: 130" X 39" (3300x1000mm)
  • Diamond blade diameter: 14",16",18" (350-400-450mm)
  • Blade bore size: 2" (50mm)
  • Min-Max stone thickness: .4"- 3.15" (10-80mm)
  • Main Motor Power: 5.5Kw 7.5HP 3 phase
  • Main Motor Rotation Speed: 1400 rpm 50Hz - 1700 rpm 60Hz
  • Main Motor Variable Speed: 700-3400 rpm 
  • Standard Voltage: 400V-50Hz / 230V-60Hz. 30AMP Breaker required
  • Dimensions of installed machine 14'2" x 74"x 69"
  • Saw weight: 2039 lbs (925kg)

Minimum width to miter:

  • The minimum width of the piece you can work depends mainly on the thickness of the piece. 
  • To calculate the minimum width you can work is always = the thickness of your piece + 14mm (necessary to block the piece under the slab stop)
  • 14mm is a standard with Weha slab stops, so for example: If your piece is thick 20mm, the minimum width you can cut is = 20mm + 14mm = 34mm

Included options for the msa miter bridge saw:

  • The saw includes a frequency inverter for the main motor, allowing the operator to set the correct peripheral speed (700-2500rpm) of the diamond blade, according to the blade diameter and the hardness of the stone to be cut.
  • Water collection and recycling system: water tray that sits under the saw to collect the water for recirculation. Comes with water pump.
  • Side extension table with rollers: 60" x 35" side extension table is equipped with rollers to facilitate slab movement
  • Frame with hot-dipped galvanizing treatment-not painted
  • Available options: 32 omni-directional rollers manually raised and lowered by hydraulic pump

Product Specifications

SKU: weha_msa_45
Manufacturer: Weha
Blade Capacity: 16"
No Load Speed (rpm): 1700
Size (L x W x H): 14'2" x 74"x 69"
HP: 7.5
Amps: 30
Voltage: 240
Wet or Dry: Wet Only
Net Weight (lbs.): 2039

Product Questions & Answers

+ Add Your Review

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Overall

You may also be interested in the following product(s)