Weha Achilli TFM 3000 10' Bridge Saw 14402

Weha Achilli TFM 3000 10' Bridge Saw 14402

More Views

Weha Achilli TFM 3000 10' Bridge Saw 14402
$29,254.80
  • Ships from Factory (More Info)
  • Free to commercial address in Continental US (More Info)
  • weha_tfm_3000

  • Weha

Product Description

The Weha Achilli TFM 3000 is a premium cutting solution for shops producing about 5-10 kitchens per week, or for high production shops that need extra cutting and fabrication speed.  The sturdy and compact structure means no foundation is required.  Set up is as simple as leveling and wiring the 220V three phase motor into the buildings power. 

The TFM 3000 is painted with epoxy powder coat finish for years of use, features E-chains to protect and guide moving cables, and the work table features galvanized steel rails for long service life. 

Saw Features:

  • Length of cut: 10' 2" (122")
  • Diamond Blade size:12", 14",16"
  • Motor: 10 HP 220 v 3 phase Motor 
  • RPM: 1700 rpm 
  • Total length: 14' or (168") 
  • Width of cutting table: 36" 
  • Total width(without side tables) 47" 
  • Total height: 90" 
  • Net Weight (with rollers and accessories) 2690 lbs 

Saw Head Features:

  • Motorized head travel with variable speed from 0-21 ft/min for both forward and reverse 
  • Head travel Length of cut: 10' 2" (122") (3100mm) 
  • Length of cut in 45 degree : 114" 
  • X-axis variable speed by inverter. 
  • Z-axis cutting depth is power driven for height adjustment 
  • Manual bridge tilt from 90° to 45° to carry out Miter/bevel cutting. 
  • Water tank with built-in recycling pump. 
  • Head runs on angled rack and pinion 

Control Panel Features: 

  • Main isolator switch 
  • Emergency stop push-button 
  • “RESET” power-on button 
  • Main motor start/stop button 
  • Main motor raise and lower buttons on the Z axis 
  • Raise and lower buttons for pop up rollers. 
  • Laser on/off switch
  • Head includes forward and reverse variable speed controls 

Included Installed Features: 

  • Hydraulic pop-up rollers to easy slab loading and positioning 
  • Roller table with 32 omni-directional pop up rollers that can be raised and lowered with the included hydraulic pump
  • Moble arm control panel for better monitoring and control during cutting. 
  • Control panel is mounted on an adjustable arm that follows the head along the cutting line. 
  • Water collection and recycling system includes a 145 gallons steel tank and a 66 GPM water pump.
  • Laser diode mounted on the head shows blade cutting line
  • 6 Work table extensions, each 20" wide, bolt to the side of the saw
  • Width of cutting table: 36" 
  • Total width with side extensions on 1 side: 56" 
  • Total width with side extensions on both sides: 76"
Also Includes:
  • 1 Side Stop (Squaring Bar) 
  • 2 adjustable limit switch stops 
  • 1 set of service wrenches 
  • User and maintenance manual 

The TFM does not require professional installation. Simply level the saw wire into the building. Fill water tank with water Install blade (we recommend the Weha 14" Matrix blade).

Product Specifications

SKU: weha_tfm_3000
Manufacturer: Weha
Warranty: 12 Month Limited Warranty
Blade Capacity: 14"
No Load Speed (rpm): 1700
Max Length of Cut (in.): 168"
HP: 10
Voltage: 220
Wet or Dry: Wet Only
Net Weight (lbs.): 2690

Product Questions & Answers

+ Add Your Review

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Overall