Hardware

Two-part profiles that forms a splashguard at the entrance of barrier-free showers. This profile is designed to be used for retrofit applications.

Heavy-duty surface joint profile with anchoring legs that protect tile edges. 7/16”-wide, soft thermoplastic rubber movement zone separates individual fields in the tile covering.

Schluter KERDI-BOARD ZC/E Corners are a corner piece U-shaped profile for use with KERDI-BOARD-ZC.

Stainless steel cover plate for use with the KERDI-LINE linear floor drain to create a seamless look in applications where multiple drains are installed end to end.

Stainless steel (V4A) versions of the Schluter-DILEX-HKS profile, a heavy-duty stainless steel, cove-shaped profile for floor/wall transitions with dissimilar sized tiles.

Coated aluminum out corners for use with RONDEC coated aluminum finishing and edge-protection profile for the outside corners of tiled surfaces.

Matching inside corners for RONDEC, a rigid, rounded-edge PVC trim profiles that resists bending and scratching.

Schluter DILEX AHKA Profiles are an anodized aluminum cove-shaped profile for transitions between walls to be tiled and previously finished floors.

Protect tiled stair edges and provide an easily visible, slip-resistant wear surface for durable, safe, and visually appealing stair-nosing design.

Schluter RENO TK Floor Transition Profiles are designed to provide a smooth transition from tile to floor coverings, typically tile to carpet.

Schluter DILEX HKW In Corners are a 90° inside corner that work in conjunction with DILEX HKW Cove Profiles and come in matching finishes.

Schluter DILEX-HK Profiles are a cove-shaped profile with rigid PVC anchoring legs and a soft CPE movement zone that separates tile fields at floor/wall transitions.

Schluter TREP S Profiles are designed to protect tiled stair edges and provide an easily visible, slip-resistant surface.

Anodized Aluminum Profiles are a finishing and edging profile that provide a decorative finish and tile edge protection, and come in multiple colors.

Solid brass RONDEC bullnose profiles. RONDEC is a finishing and edge protection profile for the outside corners of tiled surfaces.

Profile with a rigid PVC anchoring leg and a flexible joining leg with self-adhesive tape to bond the profile to fixed building elements.

Schluter-DILEX-BTS is a heavy-duty expansion joint profile that bridges expansion joints and accommodates movement via the 1-3/16” (30 mm)-wide telescopic center section.

Designed to protect tiled stair edges and provide an easily visible, slip-resistant wear surface for a durable, safe and visually appealing stair-nosing design.

DESIGNLINE is a border profile used to create decorative designs in tile fields on walls. In stainless steel, the profile can also be used to produce decorative designs in floors.

V2A 90° Schluter-DILEX-HKS outside corners with pre-cut profile sections. These items come from Germany and are special order only.

Schluter DILEX-EKSB Profiles are designed to allow movement and reduce stress in large, tiled areas, preventing cracking and de-lamination of tiles.

Aluminum cover profile that integrates with the TREP-S and TREP-B stair-nosing profiles to conceal the top of the riser.

The Schluter SHOWERPROFILE-S is a two-part profile with a tapered edge, designed to cover adjoining tile edges that become exposed as the shower floor slopes to the linear drain.

The DILEX-KSA Profile is a V4A stainless steel perimeter joint profile with a removable rubber movement zone.