Husqvarna DM230 Handheld Core Drill Rig

The Husqvarna DM230 Core Drill Rig is an attractively designed handheld rig with functional pistol-grip ergonomics. 4" to 6" capacity. (6" requires optional stand)
$2,225.00

Brand: Husqvarna

Availability: Ships from Factory (More Info)

Shipping: Standard (More Info)

SKU
968411301

The Husqvarna DM 230 Handheld Core Drill Rig (968 41 13‑01) is attractively designed with functional ergonomics. The electric motor has an ergonomic pistol grip for greater control and accruacy.

Husqvarna DM 230 can be used for handheld drilling applications up to 4" in diameter. It can be mounted on the Husqvarna DS 150 Drill Stand for angle drilling applications and drilling holes up to 6" in diameter. Husqvarna DM 230 is an excellent choice for professionals as well as less experienced users.

Overload protection. The machine uses pulsation to warn you of an approaching overload. If the load is not reduced the motor will shut off, to prevent overheating. Elgard™ increases productivity and extends product life.

Reliable gearbox. Watercooled 3 speed gearbox for optimal drilling performance and longer service intervals.


Easy start with reduced speed. Used with starting a hole, speed is reduced by half using the Smart Start® button, which reduces vibration.


Durable and ergonomic design. Durable and shock-proof, designed to protect the electronics. Easy to carry and install thanks to low weight and ergonomic design.

Smooth start with normal fuses. Softstart™ lowers incoming current to reduce amperage when starting the motor.

Dry and wet drilling. Easy to switch between dry and wet drilling


Smart Start®. Used with starting a hole, speed is reduced by half using the Smart Start® button, which reduces vibration.

Softstart™. An electronic current limiter for soft starts with normal fuses. This gives you a smooth start with high productivity and reduces initial load on motor.

Barriers. Drilling for installation of stair rails, fences, etc.

Channels, pipes and cables. Drilling ventilation channels and holes for pipes and cables.

Motor
Rated input power 2.5 hp
Frequency 60 Hz
Voltage 100-120 V
Phases 1 ph
Power source Corded
Drilling Equipment
Drill bit diameter handheld, max 3"
Drill bit diameter with stand, max 6"
Recommended drill bit diameter, min 0"
Coolant Wet
Transmission
Number of gearbox speeds 3
Spindle speed unloaded gear 1 730 rpm
Spindle speed unloaded gear 2 1,700 rpm
Spindle speed unloaded gear 3 3,600 rpm
Specifications
Water connector G 1 / 4"
Water pressure, max 116 psi
Mounting collar 2.36"
Spindle thread, inner 5/8" 11 UNC
Spindle thread, outer 1 1/4" 7 UNC
Dimensions
Product size length 17.5"
Product size width 4.2"
Product size height 13.6"
Weight 15.4 lbs
Sound and Noise
Sound power level, guaranteed (LWA) 108 dB(A)
Sound power level, measured 107 dB(A)
Sound pressure level at operators ear 93 dB(A)
More Information
SKU 968411301
UPC 805544478052
Manufacturer Husqvarna
Manufacturer Part Number 968411301
Dimensions (L x W x H) 17.5" x 4.2" x 13.6
Motor 1-Phase, Electric
Voltage 115
Weight (lbs.) 15.4
Write Your Own Review
You're reviewing: Husqvarna DM230 Handheld Core Drill Rig
Customer Questions
Where can I find a replacement handle for the DM 230?
Give us a call, and we can find the part # and special order from the manufacturer. (800) 938-7925
Did you find what you were looking for?