Schluter
-
Schluter DITRA-HEAT-E-HK Cable - 240V
Starting at $166.92Shipping: FreeSchluter Ditra Heat Cables are twisted pair heating cables designed for integration with Ditra Heat Uncoupling Membrane for interior radiant heating systems. -
Schluter DILEX-KSA Stainless Steel 3/8" Movement Joint Tile Edging Trim
Starting at $48.51Shipping: StandardProfile with a stainless steel leg and a 3/8” (10 mm)-wide, replaceable rubber movement zone that isolates the tile covering from fixed building elements. -
Schluter TREP-G Tile Trim - End Cap
Starting at $3.33Shipping: StandardDesigned to protect tiled stair edges and provide an easily visible, slip-resistant wear surface for a durable, safe and visually appealing stair-nosing design. -
Schluter DITRA Square Notch Trowel
$25.92Shipping: Free w/ $99 OrderThe 11/64" x 11/64" square notch Schluter DITRA Trowels are used to install waterproof DITRA membranes in tile installations. -
Schluter DILEX-HKW Tile Trim - 90° In Corner
Starting at $3.47Shipping: StandardSchluter DILEX HKW In Corners are a 90° inside corner that work in conjunction with DILEX HKW Cove Profiles and come in matching finishes. -
Schluter DILEX-KSN Movement Joint Tile Edging Trim
Starting at $76.65Shipping: StandardDILEX-KSN Profiles are made of V4A Stainless steel and feature a 3/8" (10 mm) wide replaceable rubber movement zone that isolates the tile from fixed building elements. -
Schluter TREP-TAP Aluminum Stair Nose Tile Edging Trim
Starting at $11.25Shipping: StandardAluminum cover profile that integrates with the TREP-S and TREP-B stair-nosing profiles to conceal the top of the riser. -
Schluter TREP-GK Stair Nose Tile Edging Trim
Starting at $52.53Shipping: StandardProfiles are designed as a retro fit to finished tile stairs and protect the tiled stair edges providing an easily visible, durable, and slip-resistant surface. -
Schluter DILEX-PHK PVC Cove-Shaped Tile Edging Trim
Starting at $16.28Shipping: StandardDILEX-PHK Profiles are a PVC, cove-shaped profile with a single anchoring leg for inside wall corners, countertop/backsplash transitions and floor/wall transitions. -
Schluter KERDI-DRAIN-AC Floor Drain Adaptor Kit - ABS
Starting at $114.11Shipping: StandardThe Schluter KERDI-DRAIN-AC Kit is a commercial adaptor kit designed to convert clamping ring drains by equipping them with an integrated bonding flange. -
Schluter KERDI-BAND Waterproofing Tape
Starting at $28.94Shipping: StandardSchluter KERDI-BAND Waterproof Tape is a waterproofing strip tape used to seal butt joints and floor/wall connections in conjunction with KERDI and DITRA Membrane and Board. -
Schluter RENO-U Reducer Tile Edging Trim
Starting at $11.18Shipping: StandardSchluter RENO U Floor Transition Profiles protect tile edges and are ideal for tile to concrete transitions. -
Schluter DILEX-HKS 90° V2A Outside Corners with Pre-Cut Profile Sections
Starting at $39.36Shipping: StandardV2A 90° Schluter-DILEX-HKS outside corners with pre-cut profile sections. These items come from Germany and are special order only. -
Schluter KERDI-BOARD V Curved Substrate Board - 24-1/2" x 96"
Starting at $69.68Shipping: StandardKERDI-BOARD V Curved Substrate Board is a substrate construction panel with vertical grooves for creating curved tile installations. -
Schluter DILEX-AS Tile Trim - Inside Corner 90°
$2.70Shipping: StandardDesigned for use with Schluter-DILEX-AS to bond the profile to fixed building elements, such as bathtubs, shower trays, and window frames. -
Schluter SHOWERPROFILE-S Cover Adjoining Tile Edging Trim
Starting at $53.95Shipping: StandardThe Schluter SHOWERPROFILE-S is a two-part profile with a tapered edge, designed to cover adjoining tile edges that become exposed as the shower floor slopes to the linear drain. -
Schluter RENO-RAMP Reducer Tile Edging Trim
Starting at $34.51Shipping: StandardSchluter RENO RAMP Profiles protect tile edges and are ideal for tile to concrete transitions in commercial applications where wheel carts are used. -
Schluter TREP-S Aluminum 1-1/32" Stair Nose Tile Edging Trim
Starting at $23.67Shipping: StandardSchluter TREP S Profiles are designed to protect tiled stair edges and provide an easily visible, slip-resistant surface. -
Schluter KERDI-BOARD ZB Profile
Starting at $37.33Shipping: StandardThe Schluter KERDI-BOARD ZB Profile is a stainless steel U-shaped profile with trapezoid perforations in three anchoring legs. -
Schluter DILEX-HK PVC Tile Trim - Inside Corner
Starting at $3.47Shipping: StandardInside Corner for for Schluter-DILEX-HK, a cove-shaped profile with rigid PVC anchoring legs and a soft CPE movement zone. -
Schluter SHOWERPROFILE-WS Alumimum Tile Trim - End Cap
Starting at $3.92Shipping: StandardAluminum endcaps for use with the Schluter-SHOWERPROFILE-WS and SHOWERPROFILE-WSK profiles. -
Schluter QUADEC Square Edge Tile Edging Trim
Starting at $14.94Shipping: StandardSquared edge profile for finishing and edge-protection of outside corners of tiled surfaces and in Stainless Steel form can be used as stair nosing and floor transition. -
Schluter RONDEC Tile Trim 3/8" Radius Sink Accessories
Starting at $39.20Shipping: StandardThese Schluter RONDEC sink corners, end caps and connectors work in conjunction with Schluter RONDEC trim pieces for use on stainless steel sink installations. -
Schluter DILEX-MPV Height Extension Profiles for DILEX-MP
Starting at $10.24Shipping: StandardDilex-MPV Joint profile height extensions are for use with DILEX-MP joint profiles, to adjust the height to the thickness of the mortar bed and tile surface.
