Poly-Epoxy adhesives combine our Polyester and Epoxy resin technology providing the strongest bond available in a polyester formula. Great for seaming and laminating all stone types including dense granite. Poly-Epoxy uses the same white paste hardener (BPO) as our Polyesters and Acrylics. Poly-Epoxy has a gel time of 4-6 minutes and is fully cured in 25-30 minutes. An excellent choice for indoor applications.
|Consistency||Mix Ratio||Gel Time||Cure Time||Shelf Life||Location||Recommended Application||Recommended Use|
|Smooth Paste||2% – 4%||3 – 5 minutes||20-25 minutes||1 – 2 years||Indoor||Natural and Engineered Stone||Seaming, Laminating, Rodding, Crack Repair, Chip Repair|
Use: To achieve the best results, the contact surfaces must be thoroughly cleaned and dried. Before adding the hardener, the resin may be tinted with Superior Coloring Paste to match the color of the stone. The resin is then thoroughly mixed with 2%-4% of the white paste hardener (BPO) by weight. At a temperature of 70°F, (21°C) the mixture stays workable for 4-6 minutes. Higher temperatures shorten the working time and lower temperatures extend the working time. After 20-30 minutes, the adhesive is fully cured and work can continue with the stone. For indoor use only.
Storage: Store indoors at room temperature. Do NOT store above 75°F (24°C). High heat and cold temperatures will adversely affect the shelf life. Avoid storage in direct sunlight and where freeze/thaw conditions may exist.
|Net Weight (lbs.)||9.00|
|Manufacturer Part Number||200-10010-12|