Schluter PRIMER-PS Peel and Stick Primer - 1 Quart
Ready-to-use primer that improves the bond of Schluter peel-and-stick membranes (DITRA-PS, DITRA-HEAT-PS, DITRA-HEAT-DUO-PS) to difficult substrates. 1 quart (946 mL).
$19.02 $2113
Availability: Out of stock
SKU
PRMPSQT1
Schluter PRIMER-PS Peel and Stick Primer - 1 Quart
Schluter PRIMER-PS is a ready-to-use primer made for Schluter peel-and-stick membranes. It improves the bond of DITRA-PS, DITRA-HEAT-PS, and DITRA-HEAT-DUO-PS to difficult substrates such as OSB, plywood, gypsum concrete, and vinyl, over both porous and non-porous surfaces indoors.
Features and Benefits
- Compatible with DITRA-PS, DITRA-HEAT-PS, and DITRA-HEAT-DUO-PS
- Dries in as little as 15 minutes, depending on conditions
- Single-coat application with roller or broom
- One-component, solvent-free, water-based formula
- Low odor and zero-VOC
- Freeze/thaw stable
Specifications
| Property | Value |
|---|---|
| Item # | PRMPSQT1 |
| Size | 1 quart (946 mL) |
| Drying time | Approx. 10-60 minutes at 70°F (21°C), 55% RH |
| Application | 1/4" (6 mm) nap roller, brush, sponge, or garden sprayer |
| Shelf life | 12 months unopened, stored at 50-90°F (10-32°C) |
Application Tips
- Prepare a clean, dry, sound surface free of sealers, curing compounds, grease, and loose residue. Primer is not a substitute for proper surface preparation.
- Acclimate primer, substrate, and room for 48 hours at 40-85°F (5-30°C). Stir well; do not dilute.
- Apply one thin, even coat without bare spots or puddles.
- Install the membrane once the primer is dry to the touch. If left uncovered more than 48 hours, apply a second coat.
Pairs with: Schluter DITRA-PS Peel and Stick Membrane.
Downloads
Download Schluter PRIMER-PS Data Sheet
Download Schluter PRIMER-PS Safety Data Sheet
Download Schluter Primers 1-Year Limited Warranty
| SKU | PRMPSQT1 |
|---|---|
| UPC | 4011832202834 |
| Non-Returnable | No |
| Manufacturer | Schluter |
| Manufacturer Part Number | PRMPSQT1 |
Write Your Own Review
Customer Questions