Fast setting, multi-purpose adhesive/filler for porous natural stones. An extremely light cured color is achieved without sacrificing a fast tack free time. Since there is very little change in color during curing, a perfect color match is nearly guaranteed! Flowing formula allows excellent penetration for horizontal laminations.
|Chemistry||Consistency||Gel Time||Cure Time||Applications||Mix Ratio||Shelf Life|
|Polyester||Liquid||4-6 minutes||10-20 minutes||Indoor||2-4% Paste Hardeners||3-4 years|
Use: To achieve the best results, the contact surfaces must be thoroughly cleaned and dried. Before adding the hardener, the resin may be tinted with Superior Coloring Paste to match the color of the stone. The resin is then thoroughly mixed with 2%-4% of the white paste hardener (BPO) by weight. At a temperature of 70°F (21°C), the mixture stays workable for 4-6 minutes. Higher temperatures shorten the working time and lower temperatures extend the working time. After 20-30 minutes, the adhesive is fully cured and work can continue with the stone. For indoor use only. Do NOT store above 75°F (24°C)
Storage: Store indoors at room temperature. Do NOT store above 75°F (24°C). High heat and cold temperatures will adversely affect the shelf life. Avoid storage in direct sunlight and where freeze/thaw conditions may exist.