Laticrete Hydro Ban Waterproof Membrane

Laticrete Hydro Ban Waterproof Membrane is a thin, load bearing waterproofing/crack isolation membrane that does not require the use of fabric in the field, coves or corners.
As low as $98.00

Brand: Laticrete

Availability: Sold In Store - Ships From Store (More Info)

Shipping: Standard (More Info)

Only %1 left
SKU
HYDROBAN

Laticrete Hydro Ban Waterproof Membrane is a thin, load-bearing waterproofing/crack isolation membrane that does not require the use of fabric in the field, coves or corners. Hydro Ban is a single component self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. Hydro Ban bonds directly to a wide variety of substrates.

Equipped with Microban antimicrobial product protection to fight the growth of stain-causing mold and mildew on the waterproofing membrane.

Laticrete Hydro Ban Membrane Features:

  • Allow for flood testing in 2 hours at 70°F (21°C) or higher (Refer to cautions section for more information on curing)
  • Does not require the use of fabric (For gaps 1/8" (3 mm) or less see DS 663.5 for complete instructions)
  • Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured
  • Bonds directly to metal
  • PVC and ABS plumbing fixtures only
  • Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
  • "Extra Heavy Service" rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
  • Changes in color from a light sage to an olive green when cured
  • Equipped with Microban antimicrobial product protection to fight the growth of stain-causing mold and mildew on the waterproofing membrane
  • Rapid drying for a faster time to tile
  • Install tile. brick and stone directly onto membrane
  • Exceeds ANSI A118.10 and A118.12
  • IAPMO approved
  • Lighter color for ease of inspection
  • Non-flammable

Download Product Brochure
Download User Manual
Download Safety Data Sheet

More Information
SKU HYDROBAN
Weight (lbs.) 12.5 - 61.0
Non-Returnable Yes
Manufacturer Laticrete
Warranty Limited Warranty Upon Manufacturer Inspection
Write Your Own Review
You're reviewing: Laticrete Hydro Ban Waterproof Membrane
Customer Questions
I have mid 70s .inacrylic .in like shower, 3 large wall pieces and the pan/floor solid matching walls. I want to tile over it. Can I use hydroban on seams?
Can you apply this product directly to cement or fortified mortar?
Yes, as long as the cement or fortified mortal is completely cured.
Average sqft per gallon? Is this recommend over hardibacker board an or durarock cement board
Approximate Coverage Commercial Unit: 250 ft2 (23.2 m2) Mini Unit: 50 ft2 (4.6 m2) Suitable Substrates Concrete Concrete & Brick Masonry Cement Mortar Beds Cement Plaster Gypsum Wallboard* Exterior Glue Plywood* Ceramic Tile & Stone** Cement Terrazzo** Cement Backer Board*** § Poured Gypsum Underlayment† * Interior applications only. ** If skim coated with a Latex Thin-Set Mortar. ***Consult cement backer board manufacturer for specific installation recommendations and to verify acceptability for exterior use. † Interior use only. Follow TCNA Guidelines/ Methods: F200, RH111, RH122, F180 This information from the Manufacturers product brochure link at the bottom of our product description. Make sure to contact the cement board manufacturer to make sure it compatible with their product.
Did you find what you were looking for?