Roberts 7350 is a solvent-free acrylic latex pressure-sensitive adhesive for resilient flooring and vinyl-backed carpet tile. It provides high initial bond strength, moisture resistance up to 10 lbs. MVER and 90% RH, and Microban antimicrobial product protection.
Roberts 7350 is a pressure-sensitive acrylic latex adhesive formulated for installing resilient flooring and vinyl-backed carpet tile. Its high-solids composition provides bond and shear strength for LVT, LVP, VCT, vinyl sheet flooring, and homogeneous or heterogeneous sheet goods.
The adhesive is suitable for properly prepared concrete, APA-rated flooring-grade plywood, steel, marble, terrazzo, and existing well-bonded vinyl tile. It also supports installations over radiant-heated subfloors with surface temperatures not exceeding 85°F (29°C).
Roberts 7350 provides moisture control up to 10 lbs. MVER and 90% RH. Microban antimicrobial product protection helps fight the growth of stain- and odor-causing bacteria.
Designed for interior residential and commercial applications, the adhesive is supplied in a 4-gallon pail and provides coverage of up to 350 sq. ft. per gallon, depending on the trowel, substrate, and installation conditions.
| SKU | ROBERTS 7350-4 |
|---|---|
| UPC | 075378735045 |
| Weight (lbs.) | 36.7 |
| Manufacturer | Roberts |
| Manufacturer Part Number | 7350-4 |
| Dimensions (L x W x H) | 12.5" x 12.5" x 12.75" |
Maintain a consistent temperature and ambient relative humidity before, during and after installation (between 65-85°F and 30-50% ambient RH). Follow all industry standards and manufacturer’s recommendations for floor flatness, acclimation and application of flooring materials. Spread adhesive uniformly onto the substrate using a trowel or roller (see trowel panel for recommendations). Adhesive trowels ridges should be well defined, consistent and achieve full coverage of the substrate. Observe open-time recommendation
When installing over a porous substrate: place flooring into semi-wet adhesive for a permanent bond or allow adhesive to dry and become tacky to the touch for a releasable bond.
When installing over non-porous substrate: always allow adhesive to completely dry and become tacky before placing flooring. Once adhesive field has reached appropriate tack, install the floor covering into the adhesive field. Roll the floor covering with a weighted roller per manufacturer’s specific guidelines. Post Installation: Restrict foot traffic and moving of heavy objects for 24 hours.