SunTouch ProMelt PM-2C Detector, 120/208/240V 30A

The SunTouch ProMelt PM-2C Detector is used to detect snowfall and low temperature and activates ProMelt Mats or Cables. Pole mount control with a "fixed" moisture sensor mounted to the top.
$646.00

Brand: SunTouch

Availability: Ships from Factory (More Info)

Shipping: Free to Continental US (More Info)

SKU
ST 81011699

The SunTouch ProMelt PM-2C sensor control is used to detect snowfall and low temperature to activate the ProMelt Mats or Cables. It is a "pole-mounted" control with a "fixed" moisture sensor mounted to the top. The PM-2C offers automatic activation, rain/snow detection, adjustable trigger temperature, and a drying cycle, as well as "manual on" operation. It operates on line voltage (120/208/240V, not 277V) and has a 30 Amp capacity. It is a stand-alone control intended for relatively small systems (up to 30 Amps). It should not be used with our Contactor Pro series of ProMelt controls, as those are designed for 24V control sensors. The unit measures approximately 5" x 7" x 3".

SunTouch ProMelt Sensor Control Specs:

Model# AMP Capacity Device Type Programming Capability UL Listing Order#
PM-2C 300600 30.00 Sensor Non Programmable N-No UL Code Rating 81011699
PM-5C 300580 60.00 Sensor Non Programmable N-No UL Code Rating 81014247

Select the best control package for your installation.

  • Total the amps of the mat and cable for each zone before comparing control options.
  • Zones with less than 60 amps can use an all-in-one control solution (PM-2C or PM-5).
  • The PM-L1 to L3 & PM-519 kits connect to a ContactorPro panel to control zones of any size.
System Size Operation Sensor Control Required Recommended
Up to 30 amp Automatic start/timed stop melting Pole-Mount PM-2C - PM-DP
Up to 60 amp Automatic start/timed stop melting Pole-Mount PM-5 - PM-DP
Any Size Automatic start & stop melting with slab
temperature control
Surface-Mount ProMelt Smart Controller ContactorPro Panel -
Any Size Automatic start/timed stop melting Pole-Mount ProMelt Smart Controller ContactorPro Panel -
Any Size Manual start & stop melting with slab
temperature control
In-Slab ProMelt Smart Controller ContactorPro Panel -
Any Size Outdoor patio heating (no snow melting) In-Slab PM-519 ContactorPro Panel -

*SunTouch now requires all orders shipping from the factory to ship with signature required.

Download User Manual

More Information
SKU ST 81011699
UPC 840213099619
Non-Returnable No
Manufacturer SunTouch
Warranty 3 Year Limited Warranty
Manufacturer Part Number 300600
Order Number 81011699
Voltage 120/208/240/277
Weight (lbs.) 3.0
Dimensions (L x W x H) 5" x 7" x 3"
Write Your Own Review
You're reviewing: SunTouch ProMelt PM-2C Detector, 120/208/240V 30A
Customer Questions
No Questions
Did you find what you were looking for?
We found other products you might like!