The Ager Tiger is suitable to darken up the color of exotic resined granite. Sometimes these granites are darker then normal due to the kind of epoxy resin used in the manufacturing process. Ager Tiger will match the color of the lighter edge with the surface in just one or two applications.
Instructions for Use: Use it only on clean and completely dry surfaces. On some non absorbent materials it is advisable to use it right after 600-800 grits and then finish of the polish. We suggest to use a clean cloth, a brush or a sponge to evenly spread it on the surface. Right after applying it to the surface, it is advisable to remove the excess with a clean cloth, steel wool or paper towel. Any excess left on the material can form a sticky and difficult to remove substance on the surface. Depending on the porosity of the stone, 1 quart of Ager Tiger is usually enough to cover 150-200 square feet of material. Close the can after use.
|SKU||TEN AGER TIGER|
|Net Weight (lbs.)||2.50|
|Manufacturer Part Number||AGER TIGER LTR|
Answer: Tenex Directions: This product must be evenly applied on a clean, dry surface. Spread Tenax Ager Tiger evenly with cloth or sponge until surface no longer absorbs product. Immediately buff with a clean cloth. Any excess of Tenax Ager Tiger creates superficial glossy and sticky films so any excess must be removed immediately after the application. Drying time is approximately 1 hour. On floor applications please wait 24 hours before walking on surface. Water repellent in about 24 hours from application.