Wedi Fundo Riolito Neo Modular Shower System - Base/Drain

Wedi Fundo Riolito Neo Modular shower base/drain system features a base extension and drain module allowing a greater variety of customization than single-piece fixed shower pans.
As low as $255.00

Brand: Wedi

Availability: Ships from Factory (More Info)

Shipping: LTL Freight


Seen if for less? Buying in quantity? Make us an offer!

The Wedi Fundo Riolito Neo Modular System is a modular shower base/drain system allowing a greater variety of customization than single-piece fixed shower pans.  It consists of two basic elements: a rectangluar module with an integrated trench drain, and a much larger sloped extension panel. Drainage can be installed close to the wall or you can use two extension modules, each leading away from either side with a centered drain module. Each module is made of Wedi's propriety 100% waterproof XPS foam and sanded resin coating.  

The drain module may also be used with mortar bed shower applications (to be topically waterproofed using wedi Subliner Dry, connecting to the Riolito Neo trench/drain module).  When purchasing, choose the appropriate drain, and the appropriate extension. The drain covers and installation kits are sold separately, and are available here: Fundo Riolito Drain Cover Plates. and wedi Fundo Riolito Drain Installation Kits 

Model # Type Size Technical Drawing
075100050 Extension 32” x 66 3/4” Download
075100052 Drain Module 32” x 50-3/4” Download
075100051 Extension 48” x 66 3/4” Download
075100053 Drain Module 48” x 50-3/4” Download



More Information
Write Your Own Review
You're reviewing: Wedi Fundo Riolito Neo Modular Shower System - Base/Drain
Question:Can this be installed over floor joists or do you need plywood under it?

Answer: It depends on joist spacing- Deflection of all subfloor installations must not exceed L/360 for ceramic tile installations and L/720 for dimensional stone installations over wedi product. Plywood subfloor joist spacing must not exceed 16” o.c. with minimum thickness of T&G exterior grade plywood of 19/32 inch. Joist spacing in excess of 16” o.c. and up to 24: o.c. requires a double layer of ¾” Exterior Grade Plywood T&G subfloor sheets, glued and screwed. Plywood sheets must be installed with a 1/8” gap between sheets. (This info can be found on the Technical Data Sheet Download (page 2) on the product page.)

Did you find what you were looking for?
Submit an Offer
Seen it for less? Buying in bulk? Make us an offer.
Another store link
Your Price