Wedi Vapor 85 Building Board (Panels) 48" x 96" x 1/2"

A special variant of the Wedi Building Panel, Wedi Vapor 85 is designed for specific installation in steam showers and steam rooms. It will serve as a strong vapor retarder, far exceeding the minimum requirements set by the Tile Council of North America (TCNA) for vapor retarders used in continuous-use steam rooms. At the same time, it offers all the benefits of the traditional and time-tested Wedi Building Panel: it is light yet strong. It can be cut and worked with cleanly and exactly. It adds insulation and provides a great bond for tile and other suitable surface finishes.

However, the best feature is that it is a component of a fully-functioning system, which was developed to also vaporproof seams and fastener penetrations. The Wedi Vapor 85 makes the best use of Wedi System Technology taken from Wedi Building Panel, Wedi Subliner Dry, Wedi Subliner Dry Sealing Tape, and Wedi Joint Sealant. Additionally, it works great with Wedi Fundo or Subliner Dry on steam room floors.

Wedi Vapor 85 (Vapor Barrier) Building Board Features:

• Carrier element for laying tile, slab, and natural stone floor coverings using the thin-bed method, and surface for plaster and other materials
• Vapor barrier
• Effective thermal insulation
• Compound seal with tile and slab coverings on wall surfaces

Wedi Vapor 85 Building Board is approved for interior use on:

• Steam rooms and showers, use Vapor 85.
• Tiled floors over wood and concrete subfloors - creates a thermal break and offers insulation value.
• Tiled countertop and kitchen backsplash installations.
• Constructing tiled seats and benches in wet areas.

Download Product Brochure
Download Wedi Vapor 85 Installation Manual
Download Wedi Steam Room & Steam Shower Design Manual
Download Technical Handbook
Download Wedi Limited Warranty