Alpha Hot-Rod Channel Cutting Granite Blade for 1/4'' Support Rods:
Alpha developed a revolutionary way to improve the efficiency of fabricators. For years, slab fabricators have employed labor-intensive procedures for creating channels in the underside of countertops to accommodate stainless steel reinforcing rods at sink and cooktop cutouts. Alpha recognized the opportunity for improvement and developed the Alpha Hot-Rod Blade.
With the Alpha Hot-Rod Blade attached to the Alpha AWS-110 or AWS-125 Wet Stone Cutter, a fabricator can accomplish the task in one easy pass.The Hot-Rod for Granite blades were created with diamond grits and matrix best suited for all categories of granite, including hard red granites, to assure a long cutting life. With a 3" diameter, the blade allows for easy use and better leverage when cutting 1/4" deep channels, by allowing for better positioning of the stone cutter's handle. This blade is now available in three thicknesses: 1/4" for standard rods, 1/8" for thinner rods and 3/8" for threaded rods.
The Hot-Rod for Marble applies the same technology but is designed for softer stones such as marble. For efficient creation of channels for reinforcing rods, attach this unique blade to our AWS-110 or AWS-125 for a smooth, dust-free operation. Used in this manner, productivity will increase significantly. Although Alpha® recommends wet cutting, these blades may be used wet or dry.
Recommended for 1/4" rods. 7/8" Arbor
|Part No.||Size||Thickness||Maximum RPM||Arbor(s)||Recommended For|
|HT03A+||3"||4.2mm/.165"||14,500||7/8", 20mm||1/8" Rod|
|HQ03A+||3"||5.5mm/.216"||14,500||7/8", 20mm||3/16" Rod|
|HR03A+||3"||7mm/.275"||14,500||7/8", 20mm||1/4" Rod|
|HW03A+||3"||11.5mm/.375"||14,500||7/8"||3/8" Threaded Rod|
|Warranty||30 Days Parts/Labor|
|Manufacturer Part Number||HR03A+|
|Blade Type||Segmented Rim|
|Arbor Size||20mm, 7/8"|
|Thickness||.165" / .216" / .275"|
|Wet or Dry||Wet or Dry|
|Size (L x W x H)||3" x 3" x (.165" / .216" / .275" / .375")|
|Net Weight (lbs.)||0.36 - 0.98|