The New Alpha ESC-125 Electric Wet/Dry Stone Cutter is an updated and re-designed Alpha AWS-125 Wet Stone Cutter. The Alpha ESC-125 is equipped with a newly designed Aluminum Manifold System that delivers a sufficient water jet to cool the cutting edge as well as removing the slurry from the cutting line ahead of the stone cutter. Since water is shooting from the back of the stone cutter towards the cutting edge, ample water is provided for any size and kind of blade that fits the ESC-125. The water feed system delivers ample volume without interruption and allows for an easy disconnect of the water hose when needed.
The included EasyOn-EasyOff Sleeve bundles the power cord and water hose to minimize the drag while making longer cuts on the table. The Clamping System ensures cutting with stability, whether executing a step-cut 3cm sink hole, or making a groove for the reinforcement rod with a much smaller diameter blades. The new more powerful motor outputs sufficient power to cut 3cm thick granite, quartz surfaces, marble, limestone, concrete and sintered slabs using a standard 110V – 15 amp circuit.
Alpha ESC-125 Electric Wet/Dry Stone Cutter features:
|Model||ESC-125 / ESC-225|
|Amperage||11.2A / 5.5A|
|No Load Speed (min-1)||12,000 RPM|
|Weight||8.9 lbs (4.0 kgs)|
|Cutting Disc Diameter||5" (125mm)|
|Max. Cutting Depth||1-5/8" (41mm)|
|Cord||15ft (4.5m) Single Phase|
|Plug Type||A (110V) / C (220V)|
|Manufacturer Part Number||ESC-125|
|Net Weight (lbs.)||8.9 lbs|
|Max Depth of Cut (in)||1-5/8"|