We recommend the Roberts 2001 as "THE" adhesive for the Radiant Positioning Mats (RPM) (used with the MasterHeat system) over plywood applications.
Roberts 2001 is a superior, commercial grade, felt-back sheet vinyl adhesive. This adhesive was developed with the optimum open time and working time for the positioning of felt-back sheet vinyl flooring.
Roberts Felt Back Sheet Vinyl Adhesive is Enviro Friendly:
Roberts 2001 is a solvent free adhesive and meets the strict requirements of the South Coast Air Quality Management District and may contribute one LEED point for Low-Emitting Material, Adhesive and Sealant (IEQ Credit 4.1). This product may also contribute one to two LEED points for MR Credit 5 if product is manufactured within 500 miles of the project site. Visit usgbc.org for additional details. Roberts 2001 is protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesive.
Uses: For adhering mineral fibrous felt-backed sheet vinyl. For interior installations only. Do not use this adhesive for pure/luxury vinyl or vinyl-backed products.
|Net Weight (lbs.)||8.82 - 35.28|
|Warranty||Lifetime Non-Staining Limited Warranty|
|Manufacturer Part Number||2001|
Answer: Roberts 2001 coverage is 60s/f per gallon, so 1000 sq ft would use 16.667 gallons. It comes in four gallon and one gallon containers. so 4 four gallon containers and 1 one gallon container should do it.
Answer: Roberts 2001 is recommended for concrete as well as plywood floors.