Schluter DITRA-HEAT-E-RS1 Smart Thermostat
Smart Wi-Fi thermostat for Schluter DITRA-HEAT systems with mirror-finish design, app control, voice assistant integration, geofencing, and built-in GFCI protection. Intelligent comfort meets elegant design.
Brand: Schluter
Availability: Sold in Store - Ships from Store or Factory (14 available in store). (More Info)
Shipping: Free to Continental US (More Info)
Schluter DITRA-HEAT-E-RS1 — Smart Wi-Fi Thermostat
The Schluter DITRA-HEAT-E-RS1 is a next-generation smart thermostat designed for the Schluter DITRA-HEAT floor warming system. Featuring a sleek mirror-finish design and full Wi-Fi connectivity, it brings intelligent comfort control to your smart home.
With seamless integration with popular voice assistants like Amazon Alexa, Google Assistant, and Apple Home, the RS1 allows you to adjust your heated floor system with simple voice commands or from anywhere using the Schluter Smart Thermostat App.
Designed for modern living, the RS1 offers advanced scheduling, geofencing, energy-saving functions, and temperature protection for laminate, vinyl, or tile floors. Its adaptive backlight and minimalist interface blend perfectly with any décor, while all advanced functions can be controlled through the app for effortless operation and monitoring.
For larger installations, it can be paired with the DITRA-HEAT-E-RRS Power Module to extend control beyond 15 amps while maintaining centralized system management.
Key Features and Benefits
- Smart home integration — works with Amazon Alexa, Google Assistant, and Apple Home
- Remote access via app — control and monitor your system from anywhere using the Schluter Smart Thermostat App
- Geofencing technology — automatically adjusts heating when you’re home or away
- Mirror-finish design — elegant, modern aesthetic with adaptive backlight
- Programmable scheduling — set time and temperature schedules directly from the app
- Energy tracking — view detailed usage reports and optimize efficiency
- Temperature protection — safeguards laminate, LVT, and wood floors
- Outdoor weather display — shows real-time conditions for better control
- Lockable controls — prevents accidental adjustments
- Dual sensor support — includes floor temperature sensors for precise regulation
- Expandable control — compatible with the DITRA-HEAT-E-RRS Power Module
- Dual voltage support — works with both 120 V and 240 V systems
Please refer to the Smart Thermostat Installation Manual and Schluter DITRA-HEAT Installation Handbook for complete DITRA-HEAT system installation instructions.
- DITRA-HEAT-E-RS1 must be installed in an electrical box. A single gang, deep electrical box or a double gang electrical box with a single gang mud ring is recommended to provide room for the wiring.
- The power supply must be shut off and all electrical connections must be made by a qualified person according to the electrical and building codes effective in your region.
- Connect the heating cable ground braid to the grounding screw of the electrical junction box.
- Remove the faceplate from the thermostat power base by loosening the screw and tilting the thermostat upward.
- For ease of installation, form the electrical line wires into an "M" or accordion shape. This will make it easier to fold them neatly into the electrical box. Loosen the load screws at the top of the thermostat until they stop.
- Insert the heating cable conductors into the holes of the load terminals. Since there is no polarity, either heating cable conductor can be connected to either load terminal.
- Secure the conductors by tightening the screws.
- Insert the electrical line wires into the line terminals. Refer to the back of thermostat for proper wiring configuration.
- Secure the wires by tightening the screws and fold the wires into the electrical box.
- Thread the floor temperature sensors through the slot opening at the bottom left of the thermostat power base. Tape up the secondary floor temperature sensor and secure to the power base.
- Strip the ends of the floor temperature sensor to expose the wires for ease of installation. Insert the floor temperature sensor wires into the indicated terminals marked "Floor Sensor". Note that the floor temperature sensor wires have no polarity and can be interchanged between the sensor terminals. Tighten the screws to secure the wires.
- Align and secure the thermostat power base to the electrical box.
- The power, heating cable, and floor temperature sensor connections are now complete. Replace the thermostat faceplate and tighten the screw at the bottom of the unit.
Note: Multiple DITRA-HEAT-E-HK heating cables can be connected and controlled by a single DITRA-HEAT-E-RS1 thermostat if the total current is less than 15 amps. The heating cable leads must be wired in parallel according to applicable electrical and building codes. Multiple DITRA-HEAT-E-HK heating cables over 15 amps cannot be connected to a single DITRA-HEAT-E-RS1 thermostat. Additional DITRA-HEAT-E-RS1 thermostats must be used or the DITRA-HEAT-E-RS1 thermostat may be combined with the DITRA-HEAT-E-RRS power modules.
Specifications
| Model | DITRA-HEAT-E-RS1 | Product Type | Smart Wi-Fi Thermostat |
|---|---|---|---|
| Compatible System | DITRA-HEAT-E-HK Heating Cables | Voltage Supply | 120 / 240 V AC, 50/60 Hz |
| Load Capacity | 15 A maximum (resistive load) | Power Output | 1,800 W @ 120 V / 3,600 W @ 240 V |
| GFCI Protection | Built-in Class A (5 mA trip level) | Display | LED with Mirror-Finish Front |
| Control | Manual or via Schluter Smart Thermostat App | Temperature Sensors | Dual 10 kΩ NTC floor sensors included |
| Finish | Mirror Gloss White | Smart Assistants | Amazon Alexa, Google Assistant, Apple Home |
| SKU | S DHE RT 105/BW |
|---|---|
| UPC | 4011832202599 |
| Non-Returnable | No |
| Manufacturer | Schluter |
| Manufacturer Part Number | DHERT105/BW |
| Voltage | 120/240 |
| Weight (lbs.) | 0.70 |
| Dimensions (L x W x H) | 3.94" x 3.15" x 5.91" |