Schluter JOLLY Aluminum Tile Edging Trim - 8 ft. 2-1/2 in.
Brand: Schluter
Availability: Ships from Factory (More Info)
Shipping: $49.95 Flat rate ground shipping for unlimited Schluter products in this order. Some exclusions apply.(More Info)
Schluter®-JOLLY Anodized Aluminum Tile Trim is a high-quality edge protection profile designed for use with wall tiles and other tiled surfaces where a clean, finished edge is desired. Its straight-edge design delivers a contemporary look while safeguarding tile edges against chipping and wear.
Made from durable anodized aluminum, Schluter JOLLY is perfect for outside wall corners, countertop edges, and tile transitions. The integrated anchoring leg is embedded in the tile adhesive, providing a secure bond and long-lasting performance. A built-in 90° corner creates a sleek and visually appealing finish that eliminates the need for unsightly caulking or exposed tile edges.
Available in a wide range of finishes and sizes, this trim is ideal for residential and commercial tile installations, offering both form and function. Whether you're finishing a backsplash, shower wall, or tiled countertop, JOLLY provides a polished edge that complements any tile style.
- New! Now features a 90° angle and matching corners!
- Prevents tile edges from chipping
- Ideal for creating decorative transitions on walls
- Ideal trim for the top edge of a tiled wall, backsplash, and bathtub surround
- Features an integrated joint spacer that establishes a defined joint cavity between the tile and the profile
- Anchoring leg is available with a radius perforation so that the profile can be used to form curves
- Select finishes also available in 10’ (3.05 m) lengths
Schluter 10-foot (3.05 m) JOLLY Profiles are available for special order in – Anodized Aluminum - Satin anodized aluminum (AE) Polished chrome anodized aluminum (ACG) Satin nickel anodized aluminum (AT) Brushed antique bronze anodized aluminum (ABGB) (due to the 10 foot size of these they ship freight from Schluter with a min $300 freight charge. If you pick up your order at Master Wholesale we can add to our stock order from Schluter to avoid the freight charge, please allow 7 to 10 days for delivery to Master Wholesale.
Schluter Edging Trim Installation
- Select the profile according to tile thickness and format.
- Using a notched trowel, apply thin-set mortar to the area where the profile is to be placed. If the JOLLY, QUADEC, RONDEC, RONDEC-DB, DECO-DE, FINEC, or FINECSQ profile is to be used as edging for an outside wall corner, finish tiling one wall first; then trowel thin-set mortar over the corner area of the second wall.
- Press the perforated anchoring leg of the profile into the mortar and align.
- Trowel additional thin-set mortar over the perforated anchoring leg to ensure full coverage and support of the tile edges.
- Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32" (1 mm) lower.
- Set the tile to the integrated joint spacer, which ensures a uniform joint of 1/16" - 1/8" (1.5 - 3 mm). With the stainless steel profiles, leave a space of approximately 1/16" - 1/8" (1.5 - 3 mm).
- Fill the joint completely with grout or setting material.
- Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials must be removed immediately, especially from aluminum.
Note: Matching corners and connectors are available. Corners are held in place with thin-set mortar. Fill the ends of the profile with thin-set mortar prior to inserting the accessories. Connectors are held in place with a friction fit. Insert the connector into the profile approximately half the length of the connector piece and connect the adjacent profile.
How do I cut profiles?
Schluter™ profiles are available in a variety of different materials , so methods for cutting vary. Below are best practices for cutting according to material type.
Plastic
Plastic profiles may be cut using Schluter™-SNIPS or similar. It is important to make sure the blade is sharp in order to ensure a clean cut.
Aluminum
One option for cutting aluminum profiles is to simply use a hacksaw. Look for a bimetal blade and select the highest teeth per inch, or TPI, available. A miter box is recommended to help ensure a straight cut. Aluminum profiles may also be cut using a variable-speed angle grinder with the Schluter-PROCUT-TSM cutting wheel. Set the angle grinder to the lowest speed. A clamp or cutting jig can be used to secure the profile and help ensure a straight, clean cut. Finally, aluminum profiles can also be cut using a chop saw or miter saw with a non-ferrous blade. After cutting, make sure to remove any burs with a file before installation.
Brass
Brass profiles can be cut by using a hacksaw with a bimetal blade with the highest teeth per inch available, or by using a chop saw or miter saw with a non-ferrous blade. Removing any burrs from the cut end of the profile with a file (or similar) is also recommended.
Stainless Steel
The simplest option for cutting stainless steel is to use a variable-speed angle grinder with the Schluter-PROCUT-TSM cutting wheel. Set the angle grinder to the lowest speed. Another option for cutting stainless steel profiles is to use a band saw with a metal cutting blade. After cutting, make sure to remove any burs with a file before installation.
| SKU | S JOLLY AA |
|---|---|
| Weight (lbs.) | 0.42 |
| Non-Returnable | No |
| Manufacturer | Schluter |
| Dimensions (L x W x H) | 8' 2-1/2" x 1 1/16" x 19/64" |
| Trim Material | Aluminum |
| Trim Length | 8' 2-1/2" |
