Schluter KERDI-LINE Drain Grate Asembly

Schluter KERDI-LINE Drain Grate Asembly
Starting at $129.55
  • Ships from Factory
    More than 5 Available In Store (More Info)
  • Free in Continental US (More Info)
  • kerdiline_grate

  • Schluter

Note: Most Schluter products are shipped factory direct, and are rarely back-ordered. Your order will ship in approximately 24 hours via UPS, and you may order more than the quantities it shows available. The quantities available reflect our in-store inventory.

The trademark of Schluter®-Systems is the exclusive property right of Schluter Systems L.P. and any commercial use is restricted except as permitted by law.

Product Description

The Schluter-KERDI-LINE Drain Grate is a low profile linear floor drain grate specifically designed for bonded waterproofing assemblies. KERDI-LINE can be installed adjacent to walls or at intermediate locations in showers, wet rooms, and other applications that require waterproofing and drainage.

  • Create barrier-free, open-concept spaces
  • Floors can be sloped on a single plane to KERDI-LINE, enabling the use of large-format tiles
  • Channel body is made of formed stainless steel and features a KERDI collar to create a secure waterproof connection
  • Two frame height options available to accommodate different tile covering thicknesses
  • Off-set and center outlets available
  • Accommodates all thicknesses of ceramic tiles and stone coverings
  • Available in lengths ranging from 20” (50 cm) to 72”(180 cm)
  • Grate assemblies sold separately and available in three designs: closed, perforated, and a frameless tileable grate
  • Can be used with the KERDI-LINE-FC to create a seamless look in applications where multiple drains are installed end-to-end

The Schluter KERDI-LINE Drain Grate assembly is appropriate for installations that use a Kerdi-Line Channel Drain but do not require the Kerdi waterproof corners and pipe/mixing valve seals. 

  • Closed: brushed stainless steel grate with no perforations. 1-27/32" width.
  • Square Perforated: brushed stainless grate with square perforations and is also available with a locking mechanism (3/4" - 19 mm frame only) for applications where tamper resistance is desired or required (e.g., healthcare and education facilities, etc.). 2-1/8" width.
  • Tileable: is a stainless steel plate with KERDI laminated on the surface to allow for bonding of ceramic or stone tile which creates a virtually invisible drainage line. 2" width.
  • Solid: is a closed-design, brushed stainless steel grate.

Perforeted and Solid kits inlude:

  • 1 closed-design or perforated, brushed stainless steel grate
  • 1 brushed stainless steel grate frame
  • 4 inside and 2 outside KERDI-KERECK waterproofing corners
  • 1 KERDI-SEAL-PS 3/4" pipe seal
  • 1 KERDI-SEAL-MV 4-1/2" mixing valve seal

Tileable kit includes:

  • 1 tileable covering support
  • 4 inside and 2 outside KERDI-KERECK waterproofing corners
  • 1 KERDI-SEAL-PS 3/4" pipe seal
  • 1 KERDI-SEAL-MV 4-1/2" mixing valve seal

The KERDI-LINE channel drain must be purchased separately.

Download KERDI-LINE Installation Handbook
Download Schluter Shower Systems Data Sheet
Download Schluter Floor Drains Data Sheet
Download Schluter Next Generation Bathroom

Product Specifications

In the Box: Grate - 3 design options: Closed-design, perforated, or frameless tileable Grate Frame - Grate frame with height adjustment spacers (not required for frameless tileable grate) KERDI-KERECK-F - Preformed waterproofing corners (4 inside and 2 outside) KERDI-SEAL-PS - 1 Pipe seal (3/4" - 20 mm) KERDI-SEAL-MV - 1 Mixing valve seal
SKU: kerdiline_grate
Manufacturer: Schluter
Warranty: 5 Year Limited Warranty

Product Questions & Answers

+ Add Your Review

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars