The Alpha Vetro Blade is designed for high-speed wet cutting of glass. Equipped with a smooth continuous diamond rim and bond hardness best suited for glass and hard vitreous materials to provide cuts with minimal chipping.
The Vetro Blade is a good choice for plunge cutting, trimming near the edges of glass and for cutting an internal radius, and must be used wet. Since the quality of the cut is high, providing straight and true cuts with minimal chipping even near the edges of glass, waste is kept to a minimum creating a cutting solution that is quite cost-effective.
The Alpha Vetro Diamond Blade is the ideal blade for the glass contractor looking for a high-speed, portable, long-lasting cutting solution.
|Part No.||Size||Thickness||Maximum RPM||Arbor(s)|
|Porcelain Tile Peformance||Good|
|Hard Granite Performance||Fair|
|Brick/Block Performance||Not Recommended|
|Asphalt Performance||Not Recommended|
|Green Concrete Performance||Not Recommended|
|Concrete Performance||Not Recommended|
|Warranty:||30 Days Parts/Labor|
|Blade Type:||Continuous Rim|
|Arbor Size:||5/8", 7/8", 20mm|
|Wet or Dry:||Wet Only|